Rogers PCB
Rogers PCB
Verified Material. No MOQ.
Genuine Rogers RO4350B and RO4003C — verified, certified, and available from 1 piece. Pure Rogers and hybrid configurations with FR-4. Material CoC on every order.
[ Photo: Rogers RO4350B laminate + finished RF board ]
Rogers Materials In Stock
We verify laminate availability before confirming every order. No surprises.
| Material | Dk | Df | Application |
|---|---|---|---|
| Rogers RO4350B | 3.48 | 0.0037 | Most popular. 5G base stations, radar, antenna feeds. |
| Rogers RO4003C | 3.38 | 0.0027 | Lower loss. Satellite comms, high-Q filters, LNA. |
| Rogers RO3003 | 3.00 | 0.0013 | PTFE-based. 77GHz automotive radar, mmWave. |
| Rogers RT/duroid 5880 | 2.20 | 0.0009 | Lowest loss. Space-grade, phased array antennas. |
Pure & Hybrid Configurations
Pure Rogers: All layers use Rogers laminate. For maximum RF performance and consistent Dk across the board.
Hybrid Rogers + FR-4: Rogers for RF signal layers, FR-4 for power/ground and digital routing. Reduces cost 40-60% while maintaining RF performance where it matters.
Our engineers help you decide which configuration gives the best performance-to-cost ratio for your specific frequency band and design.
[ Photo: Rogers material raw sheet with label ]
[ Photo: hybrid Rogers/FR4 cross section ]
No Material Substitutions. Ever.
Material CoC
Certificate of Conformance with Rogers lot number included with every shipment.
Availability Check
We verify laminate stock before confirming your order. No "surprise" lead time extensions.
No Substitutions
If you spec RO4350B, you get RO4350B. Never a "similar" material without your explicit approval.
Rogers PCB Examples
[ RF antenna board on RO4350B ]
[ Hybrid Rogers+FR4 multilayer ]
[ 77GHz radar module ]
[ Material certificate photo ]
FAQs
Rogers PCB Questions
How much more does Rogers cost vs FR-4?
Rogers RO4350B typically costs 3-5x more than standard FR-4 for the same board dimensions. Hybrid configurations (Rogers RF layers + FR-4 other layers) can reduce the premium by 40-60%.
What is the MOQ for Rogers boards?
One piece. We stock common Rogers thicknesses and can fabricate from a single board. No panel-sharing required.
How do I know I got real Rogers material?
Every order ships with a Rogers Certificate of Conformance showing the material lot number. We source exclusively from authorized Rogers distributors.
Can you do Rogers boards quickly?
7-day prototype for standard Rogers. 5-day rush available for common configurations (RO4350B, standard thickness). Lead time depends on material availability for less common variants.
Should I use pure Rogers or hybrid?
If all your critical traces are on one or two layers, hybrid saves 40-60% with no RF performance loss. Pure Rogers is for boards where every layer carries RF signals or where uniform thermal expansion matters.
Need Rogers PCB fabrication?
RO4350B and RO4003C from 1 piece. Material CoC included. Get instant quote.